Skip to content

SFIA designations explained: how to read 600S162-54

Updated · 5 min read

The four parts

The Steel Framing Industry Association (SFIA) designation system names a member by its geometry, so one code means the same section from any certified manufacturer. Read 600S162-54 left to right:

PartExampleMeans
Web depth6006.00 inches (hundredths of an inch)
StyleSStud or joist section with lips
Flange width1621.62 inches (1-5/8")
Thickness5454 mils (thousandths of an inch) of base steel

Styles

  • S, stud or joist: C-shape with stiffening lips. Wall studs, floor joists, rafters and built-up headers.
  • T, track: U-shape without lips. Top and bottom of walls, rim track, header track.
  • U, channel: small cold-rolled channel, often used for bridging.
  • F, furring channel: hat-shaped, for furring out walls and ceilings.

Proprietary systems use their own codes. ClarkDietrich TradeReady joists, for example, appear as 1200TDW5-54, where the web depth and thickness still read the same way.

Mils to gauge

Gauge is the older way to describe thickness, and suppliers still use it. Mils are the exact minimum base-metal thickness, which is why engineers specify them.

MilsApprox. gaugeTypical use
3320 (structural)Light interior walls, track
4318Load-bearing walls, track
5416Load-bearing walls, joists, headers
6814Heavier joists, jambs and headers
9712Posts, heavy beams, long spans

Why it matters for estimating

Weight per foot follows from the section, so the designation is what turns a count of pieces into pounds of steel. A 350T150-33 track weighs 0.76 lb/ft, a 350S162-43 stud 1.14 lb/ft, and a 350S162-68 stud 1.75 lb/ft. Same 3-1/2" wall, more than twice the steel. That's why an accurate estimate lists every member by designation rather than "studs, 3-1/2 inch". See how to estimate CFS framing for pricing it.

Questions

What gauge is 54 mil steel?

54 mil is about 16 gauge. Common equivalents: 33 mil ≈ 20 gauge (structural), 43 mil ≈ 18 gauge, 54 mil ≈ 16 gauge, 68 mil ≈ 14 gauge, 97 mil ≈ 12 gauge.

What is the difference between S and T in a steel stud designation?

S is a stud or joist: a C-shaped section with lips on its flanges. T is track: a U-shaped section without lips that caps the ends of studs at the top and bottom of a wall.

Keep reading

Send us a project

Upload your drawings. We'll frame it in steel and send back a takeoff and estimate you can price your own way. Free for early partners.